Measurement guide
How to measure
A few careful measurements help us quote accurately and build to fit. Here’s how — and if you’d rather we handle it, just book a site visit.
Doors
- 1Measure the opening width at the top, middle and bottom — use the smallest.
- 2Measure the height on the left, centre and right — use the smallest.
- 3Note the wall (jamb) thickness, and whether you need the jamb/frame made too.
- 4Tell us the swing direction (left/right) and whether it’s inward or outward.
Flooring
- 1Measure the room’s length and width; multiply for the area in square metres.
- 2For irregular rooms, split into rectangles, measure each, then add them up.
- 3Add about 10% for cutting and future repairs.
- 4Note the subfloor type and any level differences or transitions.
Stairs & railings
- 1Count the number of steps (treads) and measure one tread’s width and depth.
- 2Measure the total rise (floor to floor) and the going (total horizontal run).
- 3For railings, measure the length along the slope and the desired height.
- 4Photos from a few angles help us a lot — include them with your enquiry.
Cabinetry & built-ins
- 1Measure the available width, height and depth of the space.
- 2Note obstacles — outlets, pipes, windows, door swings and skirting.
- 3Tell us what it needs to hold or do (kitchen, wardrobe, vanity, media).
- 4A rough sketch or inspiration photo helps us design to fit.
Measure twice. When in doubt, send us your measurements and a few photos and we’ll check them before we build — or we’ll measure on-site for you.
Got your measurements?
